Excel Tool Saukville, Wisconsin Since 1989

Precision machined components, prototype to production.

Experts in the use of multi-axis lathes and CNC mills for small and large production machining. From 5-pieces to 20,000-pieces, we have you covered.

Request a quote Call (262) 268-8818

Call and ask for sales at (262) 268-8818 or send a drawing for a quote.

An end mill on a live-tool spindle cutting a flat on a part held in a lathe, coolant running down the guarding — Fig. 01 An end mill at work on one of the lathes

Founded: 1989
Specialty: lathes: 7–8 axis
Typical order, pieces: 5–20,000
Turn, thread, mill, drill: One setup

01 Capabilities

Specializing in multi-axis lathes

Excel Tool specializes in the use of 7-8 axis lathes and 3 axis mills to achieve high standards for production.

With the use of our multi-turret, multi-spindle, multi-axis lathes we are able to accomplish turning, threading, milling, and drilling all with one setup.

One setup

Experienced with cutting

Steel
Stainless
Aluminum
Brass
Plastics

Inside a lathe: two spindles facing each other across the work area, with tooling above and below — Fig. 02 Inside one of the multi-axis lathes

02 Secondary operations

Committed to completion

Like most businesses we have our specialty, which is the use of CNC machines to turn raw material into precision machined components. Secondary operations can be facilitated through our vast network of suppliers ranging from heat treat, shot peen, coatings, EDM work, broaching and more.

RoutingRaw material → finished part

In house CNC machining

Turning, threading, milling and drilling multi-axis lathes, one setup
3-axis milling 40″ × 20″ tables

Suppliers through our network

Heat treat
Shot peen
Coatings
EDM work
Broaching
And more

List the operations your part needs in a quote request

A bin full of finished dark machined parts, each with bores, slots and flats — Fig. 03 A production run, finished

03 Capacities

What fits on our machines

The figures Excel Tool publishes for its lathes and mills. Not sure your part fits? Send the drawing and ask.

Machine capacities, Excel Tool
Capacity	Inches	mm ≈
Lathes 6 multi-axis, 1 three-axis, 1 two-axis
Spindle through capacity bar through the spindle, up to	3.175	80.6
Max turning diameter up to	13.7	348
Y-axis travel total, up to	4.92	125
Bar feeders on the multi-axis lathes	3 of 6
Mills 2 three-axis
Table	40 × 20	1016 × 508
Z-axis travel	17.5	445
Work
Typical order	5 to 20,000 pcs
Materials	Steel, stainless, aluminum, brass, plastics

Inch figures from Excel Tool. Millimetres converted by us and rounded.

Lathes · max through spindle capacity

Lathes · max turning with chucking

Mills · table capacity

Fig. 04 Drawn from the figures in the table in isometric projection, which foreshortens edges and heights. The bar view is at twice the scale of the other two; the grid is one inch in every view, and the bar’s end face is ruled every half inch. Spindle nose, bar length, workpiece length, the chuck, the vises and the stock in them are not to any published figure. A schematic, not a machine drawing.

Equipment

6 Multi-axis lathes 3 of which are equipped with bar feeders
1 3-axis lathe
1 2-axis lathe
2 3-axis mills 40″ × 20″ tables, 17.5″ Z travel

The open work area of a lathe, its tool turret and spindle wet with coolant — Fig. 05 Lathe work area

A vertical machining center with its door open, four vises in a row on the table, control panel to the right — Fig. 06 A vertical mill, four vises on the table

04 About

A full CNC production business, since 1989

Who we are, the shop and the measuring room, and photos from the shop floor are on page 2.

About Excel Tool

05 Contact

Call the shop or ask for a quote

For professional machining services, from a few pieces to thousands, simply reach out today.

Phone(262) 268-8818
DrawingsSend a drawing for a quote
Shop403 N Progress Dr
Saukville, WI 53080 Opens Google Maps

Request a quote

The Excel Tool building: white block walls with a grey band and the words EXCEL TOOL in blue letters, on a green lawn — Fig. 19 403 N Progress Dr, Saukville

Hours

Shop hours
Monday	6:30 AM – 3:30 PM
Tuesday	6:30 AM – 3:30 PM
Wednesday	6:30 AM – 3:30 PM
Thursday	6:30 AM – 3:30 PM
Friday	6:30 AM – 3:30 PM
Saturday	Closed
Sunday	Closed